AirRide Chassis Archives - https://phatphabz.com/product-category/airride-chassis/ Tue, 02 Jan 2024 17:11:37 +0000 en-US hourly 1 https://phatphabz.com/wp-content/uploads/2022/03/cropped-Phat-Phabz-rebrand-web-image-32x32.png AirRide Chassis Archives - https://phatphabz.com/product-category/airride-chassis/ 32 32 161388170 1980-1996 Ford F-150 Chassis https://phatphabz.com/product/1980-1996-ford-f-150-chassis/ Fri, 02 Dec 2022 18:39:30 +0000 https://phatphabz.com/?post_type=product&p=5627 Available for 80-96 F-150s.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering from shaft binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 1980-1996 Ford F-150 Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Rack and pinion
– Drop spindles
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shockes(lifetime warranty)
– Cab, rear bed, and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:

$800ea – Front sway bar

$850 – 23 gallon aluminum fuel cell holds factory pump

$400 – Rear axle installation (must be shipped to Phat Phabz)

$850 – Rear axle narrowing (Moser axles replace the stock axles)

$4,400 – Wilwood 14″ rotor big brake kits

$850 – Wilwood Spindles

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors

The post 1980-1996 Ford F-150 Chassis appeared first on .

]]> 5627 1967-1972 K-5 Chassis https://phatphabz.com/product/1967-1972-k-5-chassis/ Fri, 02 Dec 2022 17:27:21 +0000 https://phatphabz.com/?post_type=product&p=5609 Available for 67-72 K5s.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering from shaft binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 1967-1972 K-5 Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Rack and pinion
– Drop spindles
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Front Cab, Rear Cab, and Core Support Mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:
$800ea – Front/Rear sway bar
$850 – 23 gallon aluminum fuel cell holds factory pump
$400 – Rear axle installation (must be shipped to Phat Phabz)
$850 – Rear axle narrowing (Moser axles replace the stock axles)
$4,400 – Wilwood 14″ rotor big brake kits

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors

 

 

The post 1967-1972 K-5 Chassis appeared first on .

]]> 5609 2015+ Ford F-150 Crewcab Chassis https://phatphabz.com/product/2015-ford-f-150-crewcab-chassis/ Fri, 02 Dec 2022 17:05:08 +0000 https://phatphabz.com/?post_type=product&p=5591 Available for 2015+ Ford F-150 Crewcab only.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering from shaft binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 2015+ Ford F-150 Crewcab Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Cab, rear bed, and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:

$800ea – Front/Rear sway bar

$850 – 23 gallon aluminum fuel cell holds factory pump

$400 – Rear axle installation (must be shipped to Phat Phabz)

$850 – Rear axle narrowing (Moser axles replace the stock axles)

$5,800 – Wilwood 16″ rotor big brake kits

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors

 

 

The post 2015+ Ford F-150 Crewcab Chassis appeared first on .

]]> 5591 1960-1966 C-10 Chassis https://phatphabz.com/product/1960-1966-c-10-chassis/ Wed, 30 Nov 2022 15:15:07 +0000 https://phatphabz.com/?post_type=product&p=5358 Available for 60-66 C10s.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering from shaft binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 1960-1966 C-10 Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Rack and pinion
– Drop spindles
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9000 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Cab, rear bed, and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:

$800ea – Front sway bar

$850 – 23 gallon aluminum fuel cell holds factory pump

$400 – Rear axle installation (must be shipped to Phat Phabz)

$850 – Rear axle narrowing (Moser axles replace the stock axles)

$4,400 – Wilwood 14″ rotor big brake kits

$850 – Wilwood Spindles

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors

 

The post 1960-1966 C-10 Chassis appeared first on .

]]> 5358 2019+ Silverado/Sierra 1500 Chassis https://phatphabz.com/product/2019-silverado-sierra-chassis/ Thu, 16 Apr 2020 13:25:37 +0000 http://phatphabz.com/?post_type=product&p=3835 Available for the Regular cab, Double cab, and Crew cab.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering shaft from binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 2019+ Silverado/Sierra 1500 Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Cab, rear bed, and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:

$800ea – Front/Rear sway bar

$850 – 23 gallon fuel cell (aluminum) holds factory pump

$400 – Rear axle installation (must be shipped to Phat Phabz)

$850 – Rear axle narrowing (Moser axles replace the stock axles)

$Call – Wilwood big brake kits(16″F/16″R or 16″F/14″R)

Additional equipment from our Online Store:

– Air Management

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors[/col2]

 

 

The post 2019+ Silverado/Sierra 1500 Chassis appeared first on .

]]> 3835 2015-2018 Tahoe/Yukon/Escalade Chassis https://phatphabz.com/product/2015-2018-tahoe-yukon-escalade-chassis/ Tue, 09 Apr 2019 20:46:02 +0000 http://phatphabz.com/?post_type=product&p=3184 Available for the Tahoe/Yukon/Escalade.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering shaft from binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 2015-2018 Tahoe/Yukon/Escalade Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Cab, bed, and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:

$800ea – Front/Rear sway bar

$850 – 23 gallon fuel cell (aluminum) holds factory pump

$400 – Rear axle installation (must be shipped to Phat Phabz)

$850 – Rear axle narrowing (Moser axles replace the stock axles)

$Call – Wilwood big brake kits(16″F/16″R or 16″F/14″R)

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors[/col2]

The post 2015-2018 Tahoe/Yukon/Escalade Chassis appeared first on .

]]> 3184 1992-1999 Tahoe/Yukon Chassis (2 Door) https://phatphabz.com/product/1988-1999-tahoe-yukon-chassis/ Fri, 05 Apr 2019 13:30:16 +0000 http://phatphabz.com/?post_type=product&p=2835 Available for the Tahoe/Yukon.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering shaft from binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 1992-1999 Tahoe/Yukon Chassis (2 Door) appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Body and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:
$800ea – Front/Rear sway bar
$850 – 23 gallon fuel cell (aluminum) holds factory pump and utilizes factory fuel door
$400 – Rear axle installation (must be shipped to Phat Phabz)
$850 – Rear axle narrowing (Moser axles replace the stock axles)
$4,400 – Wilwood big brake kit(14″F/14″R)
$850 – Wilwood Spindles

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors

The post 1992-1999 Tahoe/Yukon Chassis (2 Door) appeared first on .

]]> 2835 1988-1998 Silverado/Sierra 1500 Chassis https://phatphabz.com/product/1988-1998-silverado-sierra-chassis/ Mon, 11 Mar 2019 15:25:55 +0000 http://phatphabz.com/?post_type=product&p=2635 Available for the Regular cab, Ext cab, and Crew cab.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering shaft from binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 1988-1998 Silverado/Sierra 1500 Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Cab, rear bed, and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:
$800ea – Front/Rear sway bar
$850 – 23 gallon fuel cell(aluminum) holds factory pump
$400 – Rear axle installation (must be shipped to Phat Phabz)
$850 – Rear axle narrowing (Moser axles replace the stock axles)
$4,400 – Wilwood big brake kit(14″F/14″R)
$850 – Wilwood Spindles

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors

 

 

The post 1988-1998 Silverado/Sierra 1500 Chassis appeared first on .

]]> 2635 2001-2006 Tahoe/Yukon Chassis https://phatphabz.com/product/2001-2006-tahoe-yukon-chassis/ Tue, 18 Dec 2018 21:30:00 +0000 http://phatphabz.com/?post_type=product&p=2202 Available for the Tahoe/Yukon.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering shaft from binding as well as minimal sheet-metal modifications to your cab floor.

(Suburban/Yukon XL chassis not available at this time.)

(Normally 4-6 week build time after ordering.)

The post 2001-2006 Tahoe/Yukon Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Body and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:
$800ea – Front/Rear sway bar
$850 – 23 gallon fuel cell (aluminum) holds factory pump and utilizes factory fuel door
$400 – Rear axle installation (must be shipped to Phat Phabz)
$850 – Rear axle narrowing (Moser axles replace the stock axles)
$Call – Wilwood big brake kits(16″F/16″R or 16″F/14″R)

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors

The post 2001-2006 Tahoe/Yukon Chassis appeared first on .

]]> 2202 1999-2006 Silverado/Sierra 1500 Chassis https://phatphabz.com/product/1999-2006-silverado-sierra-chassis/ Wed, 12 Dec 2018 14:34:20 +0000 http://phatphabz.com/?post_type=product&p=1935 Available for the Regular cab, Ext cab, and Crew cab.

-Our front setups include lock-to-lock turning radius without rubbing the frame rails.
-The control arms allow up to 14.5 inches of lift to help un-tuck those large wheels after laying body.
-A front sway bar(optional) adds to the improved drive-ability of a body dropped truck.
-The parallel rear four link and sleeve air bag suspension creates a stable, yet smooth ride out back.
-A lowered rack and pinion mounting location in conjunction with lowered motor mounts keep steering shaft from binding as well as minimal sheet-metal modifications to your cab floor.

(Normally 4-6 week build time after ordering.)

The post 1999-2006 Silverado/Sierra 1500 Chassis appeared first on .

]]> $11,500.00 – Each BASE chassis includes:
– Bumper to bumper 2×4 .188wall rails
– Upper and lower control arms
– Spindles(re-tapered)
– Balljoints(lifetime warranty)
– Chromoly heim steering kit
– Motor mounts
– Transmission crossmember
– Carrier bearing crossmember(if necessary)
– Parallel 4 link with diagonal track bar
– (2)2600 Airlift Dominator bags(front)
– (2)Firestone F9100 bags(rear)
– (4)Monroe-Matic gas charged shocks(lifetime warranty)
– Cab, rear bed, and core support mounts
– Front and rear bumper mounts

OPTIONAL equipment includes:
$800ea – Front/Rear sway bar
$850 – 23 gallon fuel cell(aluminum) holds factory pump and utilizes factory fuel door
$400 – Rear axle installation (must be shipped to Phat Phabz)
$850 – Rear axle narrowing (Moser axles replace the stock axles)
$Call – Wilwood big brake kits(16″F/16″R or 16″F/14″R)

Additional equipment from our Online Store:

– Air Management – Accuair E-Level w/VU4, Air Lift 3H

– Aluminum 5 gallon Air Tank

– ViAir Dual Pack Compressors

The post 1999-2006 Silverado/Sierra 1500 Chassis appeared first on .

]]> 1935